- Home
- ยป
- Our Products
- »
- Sectional Warping Machine
Sectional Warping Machine
Advanced Computerized Sectional Warping Machine
Product Brochure
Minimum Order Quantity | 1 Unit |
Product Type | Warping Machine |
Material Capabilities | Cotton, Polyester, Nylon |
Machine Type | Automatic |
Material | Mild Steel |
Power Source | Electric |
Beam Flange Diameter | 1000 mm |
Voltage | 440 V |
Warranty | 01 Year |
Capacity | 10 Sets/Month |
Working width | 4000 mm |
Model Name/Number | Servotech-115 |
Country of Origin | Made in India |
Frquency | 50 Hz |
Phase | 3 Phase |
Graphic Display | 7" TFT Touch Screen |
Drum Circumference | 2.5 m |
- Basic construction of the machine is sturdy, compact, modular, ergonomically designed and comfortable to operators, electricians and mechanics. Overall height of machine structure is one meter and cone drum is 1.52 meters. The highest point is light signal pole at 1.6 meter height. All the four sides are within the range of eyesight and supervision of operator. The main frames and side walls are connected with sturdy cross members of M.S frames and smoothly moving with M.S wheels fitted with bearings. Main frame is with warping designed and constructed for heavy loads and vibration free operations. Beaming Section in Servo tech models is offered separate and fixed on floor.
Warping Drum – Metallic, Fixed Cone Height, Dynamically Balanced:
- Warping drum has been designed after many trials and working experience with various yarn materials. The drum is complete in M.S of 8 mm thick steel plate, machined over whole length of drum with fixed cone height 90 Degree dynamically balanced to avoid vibrations during high speed operations. The cone and cylindrical drum is strongly supported with Sufficient M.S rings and Cross Channel both on a sturdy main shaft of drum to withstand very high crushing force. Main shaft is fitted with heavy duty wide bearings on main side walls of the machine. We provide support in drum at every 300MM, The working width is 2200mm to 3000 mm and drum circumference 3 mtrs
Technical Specifications:
- Working Width: 2200mm To 4000 MM
- Drum Type: Metallic Drum, Dynamically Balanced
- Drum Cone Height: Fixed - 11 Or 9 Or 7
- Drum diameter: in 2.5 mtr. 796 dia & in 3mtr. 955
- Warping Speed: 10 To 600 Mtrs. / Min
- Beaming Speed: 10 To 100 Mtrs. / Min
- Warp Table: In Out mechanical device by magnetic clutch
- Section Width - Std: 300 Mm (Std Section Width - Wider: In case Of Coarse & Higher Ends Beam Flange Dia: 800 Mm – 1000 Mm -1250 Mm
- Beaming Section: Separate And Fixed On Floor
- Electric Motors: One For Warping, One For Beaming
- Plc Controls: Various Controls
- Servo Controls: One Servo Systems
- Beam Drive: Ac Variable Speed, Frequency Controlled
- Beaming Tension: Hydraulic Belt Brake Or Disc Brake (hydraulic with pneumatic)
- A.C variable frequency control drive for warping and beaming motor.
- One Servo system with synchronous speed of table with drum by servo motor & drive
- Ethernet graphical touch screen color display for desired process data
- Programmable logic controller (PLC) with exclusive function.
- Engaging & disengaging of beam by manually.
- Fixed cone, Metallic drum, dynamically balanced. Drum circumferences 3 mtr.
- Another servo system for warp table in out process, Automatic distance maintained between drum to traverse table and reed by another servo system.
- Separate beaming section.
- Hydraulic disc brake with blower for brake disc cooling
- UPS for power fail back up of Beam Data.
- Standard beam barrel length working width +600.
- We provide head stock traverse rail and one set Beam Adaptor.
Additional Information:
- Delivery Time: 03 MONTHS
Computerized Sectional Warping Machine
Product Brochure
Power Consumption | 22 kW |
Material Capabilities | Nylon |
Machine Type | Automatic |
Automation Grade | Automatic |
Material | Mild Steel |
Power Source | Electric |
Beam Flange Diameter | 1000 mm |
Voltage | 440 V |
Warranty | 1 Year |
Capacity | 10 Sets/Month |
Working width | 3000mm |
Model Name/Number | Servotech-120 |
Country of Origin | Made in India |
Section Width | 600mm |
Frequency | 50 Hz |
Beaming Speed | 130 Mtrs. / Min. |
Phase | 3 Phase |
Graphic Display | 10" TFT Touch Screen with Ethernet Connection |
Weight | 5 Ton |
Drum Type | Metallic Drum, Dynamically Balanced |
Drum Diameter | 955 mm |
Drum Circumference | 3 mm |
Warping Speed | 700 Mtrs. / Min. |
- Working Width: 2200mm to 3000mm
- Drum Cone Height: Fixed 90 or 70
- Warping Speed: 10 To 700 Mtrs. / Min.
- Beaming Speed: 10 To 130 Mtrs. / Min.
- Warp Table: With feeler roller and Traverse by Servo Motor
- Section Width Std.: 250 Mm (Std.)-600mm
- Section Width - Wider: In case Of Coarse & Higher Ends – 600mm
- Beaming Section: Separate And Fixed On Floor
- Drum Drive: Ac Variable Speed, Frequency Controlled.
- Electric Motors: One For Warping, One For Beaming
- Plc Controls: Various Controls
- Servo Controls: Two Servo Systems (PANASONIC MAKE)
- Graphic Display: 7” to 10” TFT Touch Screen with Ethernet Connection
- Beam Drive: Ac Variable Speed, Frequency Controlled
- Beaming Tension: Imported Made in Italy Hydraulic Disc Brake
- Beam Tension: Provide by hydraulic Proportional control valve
- Beam Traverse: Beam traverse control by oscillation system
Basic Machine Construction – Warping & Beaming:
- Basic construction of the machine is sturdy, compact, modular, ergonomically designed and comfortable to operators, electricians and mechanics. Overall height of machine structure is one meter and cone drum is 1.52 meters. The highest point is light signal pole at 1.6 meter height. All the four sides are within the range of eyesight and supervision of operator. The main frames and side walls are connected with sturdy cross members of M.S frames and smoothly moving with M.S wheels fitted with bearings. Main frame is with warping designed and constructed for heavy loads and vibration free operations. Beaming Section in Servo tech models is offered separate and fixed on floor.
Warping Drum – Metallic, Fixed Cone Height, Dynamically Balanced:
- Warping drum has been designed after many trials and working experience with various yarn materials. The drum is complete in M.S of 8 mm thick steel plate, machined over whole length of drum with fixed cone height 90 Degree dynamically balanced to avoid vibrations during high speed operations. The cone and cylindrical drum is strongly supported with Sufficient M.S rings and Cross Channel both on a sturdy main shaft of drum to withstand very high crushing force. Main shaft is fitted with heavy duty wide bearings on main side walls of the machine. We provide support in drum at every 300MM, The working width is 2200mm to 3000 mm and drum circumference 3 mtrs
Advanced Functions
- Table First Section Position Automatically.
- ActualLength Measurement.
- Auto Section Position.
- Yarn Brake and Memory.
- Constant Linear Warping Speed Control.
- Constant Linear Beaming Speed Control.
- Lease Length Normal Lease or 7 Lease.
- Pre-Difined Auto Stop 1st Lease /2 nd. Lease and warp Length.
- On Screen Help Menu to Guide Operator.
- Computer Compatibles for Software Up-gradation.
- Mis-Operating Trouble Shooting on Display.
- Electrical Component Failure Status.
- Motors Status on Display.
- Auto stop power failure status on display
- Variable frequency AC drive data on display
- Drum auto stop on lease hole
Additional Information:
- Delivery Time: 3 Months
High Speed Electromech Sectional Warping Machine
Product Brochure
Power Consumption | 22 kW |
Material Capabilities | Cotton |
Machine Type | Automatic |
Material | Mild Steel |
Power Source | Electric |
Beam Flange Diameter | 1250mm |
Voltage | 440 V |
Warranty | 1 Year |
Model Name/Number | Electromech 100 |
Country of Origin | Made in India |
Working Widths | 3600 mm |
Drum Type | Metallic Drum, Dynamically Balanced |
Drum Circumference | 2.5m |
Warping Speed | 500 Mtrs. / Min. |
Beaming Speed | 100 Mtrs. / Min. |
Warp Table | Traverse In 500 Steps (Mechanical) |
Section Width | 250 mm |
Section Width Wider | More Than 250 mm |
Frequency | 50 Hz |
Phase | 3 Phase |
- Liquid Waxing Device-three Roller Systems
- Electronic Static Eliminator On Table And Lease Reed Stand
- Eyelet Board
- Liquid Waxing Unit For Circulation
Salient Features:
- Additional Beam Adaptor Supplied At Extra Cost ( We Supply One Set With Machine)
- Ac Variable Speed, Two Separate Motors For Warping And Beaming
- Hydraulic Band Brakes On Both Sides.
- Auto Breaking In Case Of Power Failure
- Safety Device To Avoid An Accident
- Ergonomically Designed Structure
Specifications:
- Working Width: 2200Mm To 3600 Mm
- Drum Cone Height : Fixed, (110 Or 90 Or 70 )
- Warping Speed: 10 – 500 Mtrs. / Min.
- Beaming Speed: 10 – 100 Mtrs. / Min.
- Beam Flange Dia: Up To 2800Mm Working Width Beam Flange Dia Meter Is, 1000Mm Provided By Us And Up To 3600Mm Working Width Beam Flange Dia Meter Is 1000Mm But Yarn Winding Capacity Is 800Mm Provided By
- Drum Drive: Ac Variable Speed, Frequency Controlled.
- Electric Motors: One For Warping & One For Beaming.
- Braking System: Hydraulic, Belt Brakes(3” Wide)
Basic Machine Construction – Warping & Beaming:
- Basic construction of the machine is sturdy, compact, modular, ergonomically designed and comfortable to operators, electricians and mechanics. Overall height of machine structure is one meter and cone drum height is 1.52 meters. The highest point is light signal pole at 1.6 meter height. All the four sides are within the range of eye sight and supervision of operator. The main frames and side walls are connected with sturdy cross members of M.S frames and smoothly moving with M.S wheels fitted with bearings. Main frame is with warping and beaming section designed and constructed for heavy loads and vibration free operations. The Beaming section in “ELECTROMECH 100” model is built in with machine depending upon beam flange dia and beam width.
Warping Drum – Metallic, Fixed Cone Height, Dynamically Balanced:
- Warping drum has been designed after many practical trials and working experience with various yarn materials. The Metallic drum is complete in M.S of 8 mm thick steel plate, machined over whole length of drum with fixed cone height (either 110 or 90 or 70) and dynamically balanced to avoid vibrations during high speed operations. The cone and cylindrical drum is strongly supported with 6 to 7 M.S rings on a sturdy main shaft of drum to withstand very high crushing force. Main shaft is fitted with heavy duty wide bearings on main side walls of the machine. The working width may be from 2200 mm to 3600 mm and drum circumference may be either 2.5 mtrs.
Drum Drive – Variable Speed:
- Warping drum is driven by AC electric motor having frequency controlled A.C Drive at any desired speed suitable as per yarn quality and material. Warping speed can be varied from 10- 500 mtrs / min manually by speed pot at warping table. Warping drum can be run in reverse or forward direction by a foot pedal running through out the length of the machine or the push buttons on the side of the machine. Crawl speed (inching motion) can also be varied from1 0-50 mtrs. / min manually by push button supplied on warping table. Beaming drive has separate A.C motor, frequency controlled A.C drive system which can be varied from 10-100 mtrs / min from the operating panel on beaming side.
Additional Information:
- Delivery Time: 3 Months
Advanced Sectional Warping Machine
Product Brochure
Automation Grade | Automatic |
Material | Mild Steel |
Power Source | Electric |
Beam Flange Diameter | 1000 mm |
Voltage | 440 V |
Weight | 9000 kgs Approx |
Warranty | 1 Year |
Winder | Yarn |
Working width | 3000 mm |
Model Name/Number | Servotech-130 |
Country of Origin | Made in India |
Beaming Speed | 130 Mtrs. / Min. |
Frequency | 50 Hz |
Phase | 3 Phase |
Drum Type | Dynamically Balanced |
Drum Plate Thickness | 10 mm |
Drum Diameter | 955 mm |
Drum Circumference | 3 m |
Warping Speed | 700 Mtrs. / Min. |
Graphic Display | 10" TFT Touch Screen with Ethernet Connection |
Specifications:
- Beam Drive: Ac Variable Speed, Frequency Controlled
- Beaming Tension: Imported Made in Italy Hydraulic Disc Brake
- Beam Tension: Provide by hydraulic Proportional control valve
- Beam Traverse: Beam traverse control by oscillation system
- Servo Controls: Three Servo Systems (Panasonic Make)
- Plc Controls: Various Controls
- Electric Motors: One For Warping, One For Beaming, One for Hydraulic, One for Lease reed, One for Waxing device
- Drum Drive: Ac Variable Speed, Frequency Controlled.
- Beaming Section: Separate And Fixed On Floor
- Working Width: 2200mm, 2400mm, 2800mm
- Drum Type: Metallic Drum, Dynamically Balanced
- Warping Speed: 10 To 800 Mtrs. / Min.
- Beaming Speed: 10 To 130 Mtrs. / Min.
- Warp Table: With feeler roller and Traverse by Servo Motor
- Section Width – Std.: 250 Mm (Std.)-600mm
- Section Width - Wider: In case Of Coarse & Higher Ends – 600mm
Salient Features:
- A.C variable frequency control drive for warping and beaming motor.
- Three Servo system with synchronous speed of table with drum by servo motor & drive
- 10” Ethernet graphical touch screen color display for desired process data
- Programmable logic controller (PLC) with exclusive function.
- Engaging & disengaging of beam by manually.
- Fixed cone, Metallic drum, dynamically balanced. Drum circumferences 3 mtr.
- Another servo system for warp table in out process, Automatic distance maintained between drum to traverse table and reed by another servo system.
- Separate beaming section.
- Hydraulic disc brake with blower for brake disc cooling
- UPS for power fail back up of Beam Data.
- Standard beam barrel length working width +600.
- We provide head stock traverse rail and one set Beam Adaptor.
Basic Machine Construction Warping and Beaming:
- Basic construction of the machine is sturdy, compact, modular, ergonomically designed and comfortable to operators, electricians and mechanics. Overall height of machine structure is one meter and cone drum is 1.52 meters. The highest point is light signal pole at 1.6 meter height. All the four sides are within the range of eyesight and supervision of operator. The main frames and side walls are connected with sturdy cross members of M.S frames and smoothly moving with M.S wheels fitted with bearings. Main frame is with warping designed and constructed for heavy loads and vibration free operations. Beaming Section in Servo tech models is offered separate and fixed on floor.
Additional Information:
- Production Capacity: 10 Pieces
- Delivery Time: 3 months
Mink Blanket Direct Warping Machine
Product Brochure
Brand | Tech Mech |
Automation Grade | Automatic |
Material | Mild Steel |
Power Source | Electric |
Beam Flange Diameter | 1250 mm |
Model Name/Number | T-1250 |
Voltage | 440 V |
Warranty | 1 Year |
Working width | 2400 mm |
Country of Origin | Made in India |
Graphic Display | 7" TFT Color LCD Compact Touch Panel |
Warping Speed | 700 Mtrs. / Min. (Higher On Request) |
Frequency | 50 Hz |
Phase | 3 Phase |
- For raschel & other looms for production of mink blanket there is a requirement of direct warping machine, our special machine the beam diameter is 1250mm so beam production capacity is higher than small spindle
- Due to higher winding speed in our direct warping machine the duration of winding in both machine (small spindle & 1250mm big beam) is equal, so in same time you can get more production,
- In our direct warping machine we provide yarn sheet tension control unit between clreel & machine, for this tension unit you can get even tension in full yarn sheet as per your requirement from begning to end in winding, in multiple small spindle for weaving there is issue in tension variation, for this variation the shade variation may be come in cloth.
- In samll spindle vestage of yarn due to variation of yarn length, and in big beam there is no issue for vestage of yarn.
Features:
- Braking Device: Imported Make Hydraulic Disc Brakes For Immediate Stop The Beam
- Beam Loading & Unloading: Chucking De Chucking By One Side Hydraulic System And Another Side Is Motorised System
- Comb Zig-zag Comb: Zig-zag Comb Adjustable With Manually Adjustable, Motorized Traverse & Up/Down Movement Automatic
- Drive: Ac Motor With Ac Drive Variable Speed Frequency Controlled With Slow & Smooth Start
- Safety Device: Safety Device System By Front Side By Limit Switch & Back Side By Optical Sensor System
- Beam Adjusting: Bram Adjusting By Automatic System
- Programmable Logic Controller (Plc): Imported Omron Make Plc
- Yarn Sheet Tension Control: Provide By Pneumatic System
Benefits For Mink Blanket Direct Warping Machine Model “T-1250”:
- For Raschel & Other Looms For Production Of Mink Blanket There Is A Requirement Of Direct Warping Machine, Our Special Machine The Beam Diameter Is 1250Mm So Beam Production Capacity Is Higher Than Small Spindle
- Due To Higher Winding Speed In Our Direct Warping Machine The Duration Of Winding In Both Machine (Small Spindle & 1250Mm Big Beam) Is Equal, So In Same Time You Can Get More Production
- In Our Direct Warping Machine We Provide Yarn Sheet Tension Control Unit Between Clreel & Machine, For This Tension Unit You Can Get Even Tension In Full Yarn Sheet As Per Your Requirement From Begning To End In Winding, In Multiple Small Spindle For Weaving There Is Issue In Tension Variation, For This Variation The Shade Variation May Be Come In Cloth.
- In Samll Spindle Vestage Of Yarn Due To Variation Of Yarn Length, And In Big Beam There Is No Issue For Vestage Of Yarn.
- Our Dierct Warping Machine Reduce The Beam Handling Duration Due To Single Beam Instead Of Multiple Spindle.
Basic Machine Construction:
- Basic construction of the machine is sturdy, compact, modular, ergonomically designed and comfortable to operators, electricians and mechanics. Main side walls and cross members of m.S frames are structurally designed to take up heavy loads and vibration free operations. Whole machine framing is mounted on separate m.S plate which does not require any extra effort for foundation. Electrical panel, motor, drive to warping machine enclosed under is cover for dust free operations
Additional Information:
- Delivery Time: 3 Months
Sectional Warping Machine
Product Brochure
Minimum Order Quantity | 1 Number |
Automation Grade | Automatic |
Material | M.S |
Beam Flange Diameter | 800mm |
Power Consumption | 440 V +- 5%, 50 Hz, 3 Phase |
Product Type | Warping Machine |
Capacity | 04 SET |
· A.C variable frequency control drive for warping and beaming motor.
· Stepless system with synchronous speed of table with drum by servo motor & drive
· 7” graphical touch screen color display for desired process data.
· Programmable logic controller (PLC) with exclusive function.
· Engaging & disengaging of beam by manually.
· Fixed cone, Metallic drum, dynamically balanced. Drum circumferences standard 2.5 mtr.
· Automatic distance maintained between drum to traverse table and reed by auto mechanically.
· Separate beaming section.
· Hydraulic disc brake for blower for disc.
· UPS for power fail back up of Beam Data.
· Standard beam barrel length working width +600.
· We provide head stock traverse rail and one set Beam Adaptor.
Additional Information:
- Item Code: SERVOTECH-115B800
- Production Capacity: 4
- Delivery Time: 03 MONTHS